Product Information : Of quality of course, attractive! 100 Ruijia POF six advantage : (1) uniform thickness, shrinkage rate as high as 65%, can be used for a variety of special-shaped packing; (2) friction coefficient of stability, ease of product high-speed packaging; (3) the proportion of thin-film layer uniform sealing strength ; (4) high level of transparency, flexibility and strong, packing evident result; (5) good resistance to cold, at minus 20 degrees is still maintaining its flexibility; (6) Tensile strength, suitable for manual , semi-automatic and high-speed fully automatic packaging machine. product features :
(1) green non-toxic, superior quality and to use environmentally friendly materials, sealing will not produce toxic, noxious gases, in line with the U.S. FDA standards; (2) tightly sealed, welded seal good performance welded seal of good performance, and a wide range of welding seal, low temperature, good solderability; (3) shrinkage rate, the effect obviously Shrinkage "70% of all types of special-shaped plastic products have just the right capacity, packaging, body-nature. (4) sealed packaging, dust resistance wet generated due to the unique three-compartment oxygen compound layer, gas-tight, non-breathable, barrier is good, and difficult to contaminated dust; (5) thin tough, uniform thickness the proportion of light, the actual unit, low cost, flexibility and strong, tensile strength, impact resistance, easy to break; (6) a high degree of transparency, good gloss high degree of transparency, good gloss, can improve product packaging grades; (7) cold, low-temperature performance is good at low temperatures to minus 20 degrees Celsius remain soft and will not be hard brittle hair, anti-low temperature performance is good, not easy to aging. (8) excellent sealing performance, packaging and easy to good heat-sealing, operation easy, not easy to cut film, suitable for high-speed packaging machine spec sheet :
project | units | single | double | cylinder (hot side) | Thickness | μm | 12-35 | 12-35 | 12-35 | width | mm | 60-1500 | 80-1400 | 150-1400 | Length / roll | m | 500-3000 | 500-2000 | 500-2000 |
|